Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateAmarr Weather Seal Replacement: The Atlanta Owner’s Guide
We stock and install Amarr-compatible weather seal replacement throughout Atlanta, with most jobs running $110 – $220 installed, parts and labor included, and we can typically get to you the same day. The bottom seal is the long rubber strip bolted or slid into the bottom of your Amarr door, and Georgia weather is brutal on it. You’ll usually notice the problem as a strip of daylight under the door, water pooling in the corner after a thunderstorm, or leaves and pine needles that somehow keep finding their way inside.
Marcus Ellery and our crew replace Amarr weather seals regularly across Atlanta, and the honest truth is this part ages faster here than almost anywhere else. Heat, humidity, and the sun’s UV beating on the south-facing side of a garage door will crack, flatten, and harden rubber in about four to seven years. If you’re seeing gaps, it’s time.
Which Amarr Models This Applies To
This applies to essentially every residential Amarr door sold in the Atlanta market: the Lincoln, Oak Summit, Stratford, Classica, and Heritage series, plus their builder-grade Olympus and Hillcrest lines. Amarr uses two main bottom seal profiles. The first is a T-style channel seal that slides into a single aluminum retainer. The second, found on many Classica and Stratford doors, is a bulb-style seal that presses into a round channel. They are not interchangeable, which is the single most common reason a homeowner buys the wrong part from a big-box store and ends up calling us anyway.
Amarr’s OEM seals are good quality, but the polymer they use does tend to flatten out in sustained heat. For Atlanta summers, we often recommend a high-density EPDM rubber aftermarket replacement that holds its shape better in direct sun and costs about the same. The retainer itself rarely needs replacing unless it’s bent or corroded. We always check the retainer before quoting the seal, so you’re not paying for one when you only need the other. Bramwell Garage Doors Atlanta is an independent service provider, not affiliated with Amarr, but we service their doors every week and keep the common profiles on the truck.
Styles & brands we work with






Signs Your Amarr Weather Seal Replacement Is Failing
- Daylight visible under the door. The seal has flattened or cracked past the point where it makes contact with the concrete. This is the failure you can see from across the garage, and it means the seal is no longer doing its one job.
- Water pooling along the inside of the door after rain. Atlanta gets over 50 inches of rain a year, and a failed bottom seal channels water straight into your garage. If you’re finding wet spots near the door track after a storm, the seal is the prime suspect.
- Leaves, dirt, and bugs getting in. The gap under a garage door doesn’t need to be big to let in roaches, crickets, and the pine straw that seems to blow into every garage in the metro area. A torn or flattened seal is an open invitation.
- Visible cracks, tears, or a flattened profile. Physical inspection tells the story fast. A healthy Amarr seal has a rounded bulb shape. A failing one looks pressed flat, brittle, or split at the edges where it meets the door.
- Higher energy bills or a garage that won’t hold temperature. If your garage stays hot well into the evening in August, a failed seal is letting cooled air escape or hot air pour in. It’s the cheapest energy fix most Atlanta homeowners can make on a garage.
Replacement Cost & What’s Included
Here’s what we charge for Amarr weather seal replacement in Atlanta, with everything spelled out before we touch the door:
- Standard T-style or bulb seal replacement: $110 – $220 installed, parts and labor included
- High-density EPDM aftermarket upgrade: $140 – $220 installed, depending on door width and seal profile
- Aluminum retainer replacement (if corroded or bent): Add $60 – $100, only when it’s actually needed
What drives the range is door width and which seal profile your Amarr uses. A single-car door is less material than a double. The bulb seals on Classica doors run a little higher because the profile costs more. The price you’re quoted is the price you pay, in writing, before any work starts. That’s the Kingswell Way: say the price before the work, show up in the window, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. Every seal replacement carries our 365-Day Done Right Promise, so if that seal fails within a year, we come back and replace it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Weather seal replacement is one of the safer garage door repairs to attempt yourself, and we’ll tell you that straight. The dangerous components here are the torsion spring (the heavy coil above the door that handles most of the lifting weight) and the cables under tension, and you should never touch those without training. But sliding out an old seal and working a new one into the retainer is mostly fussy, not dangerous. The catch is getting the right profile. If you buy the wrong seal, which happens constantly, you’ve spent forty bucks and an afternoon with nothing to show for it.
The other catch is that a door that’s sitting off-level or has a sagging panel will wear out a new seal in months, not years. When we replace an Amarr seal, we check the door’s balance and travel at the same time, and we’ll tell you if something else is going to eat your new seal. Tell me what it’s doing, and I’ll tell you what it needs, no guesswork, no extras. If you’d rather just have it handled, call (229) 792-2327.
FAQs
In Atlanta’s heat and humidity, expect four to seven years from an Amarr weather seal before it flattens or cracks enough to need replacement. South-facing doors tend to fail faster because the seal bakes in direct sun. Call (229) 792-2327 and we’ll tell you over the phone whether yours is worth saving or ready to go.
No, a torn or flattened Amarr weather seal can’t be patched or glued, and sealant doesn’t hold on the rubber profile. The part is a wear item, and replacement is the only fix that works. The good news is it’s one of the least expensive repairs on a garage door, and we carry the common profiles on the truck for same-day service.
A standard Amarr weather seal replacement takes 30 to 45 minutes from start to finish, including removing the old seal, cleaning the retainer channel, and testing the door’s travel. If the retainer itself needs replacing, add another 15 to 20 minutes. Either way, it’s a single visit with a live person answering when you call.
Yes, we keep both the T-style and bulb-style Amarr-compatible seals in common lengths on the truck, along with high-density EPDM aftermarket options. We also carry parts for LiftMaster, Chamberlain, and Genie openers, so if we spot something else while we’re there, we can handle it in the same visit. Call (229) 792-2327 for an exact quote, and we’ll have the right seal with us when we pull up.
Get Your Amarr Weather Seal Replaced in Atlanta
If your Amarr door is showing daylight, leaking water, or letting the Georgia heat pour in, call Bramwell Garage Doors Atlanta at (229) 792-2327. We’ll quote the replacement in writing before any work starts, arrive in the window